Last Modified: 11-29-2007 1.6 G
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000001TK9003X
Title: DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Driver Side): INSPECTION (2008 Sequoia)

INSPECTION

1. INSPECT BACK DOOR CONTROL SWITCH

(a) Inspect the resistance of the switch.

Standard Resistance:

Terminal No.

Switch Condition

Specified Condition

3 (E) - 6 (CSW)

Free

Below 1 Ω

3 (E) - 6 (CSW)

Pushed

10 kΩ or higher

If the result is not as specified, replace the back door control switch.

(b) Check the illumination operation.

(1) Connect the positive (+) battery lead to terminal 5 (ILL+) and the negative (-) battery lead to terminal 4 (ILL-), then check that the illumination illuminates.

OK:

Illumination illuminates.

If the illumination does not illuminate, replace the back door control switch.